Decorate Your Home or Office with Crown Moulding

Crown moulding is described as an ornamental piece of wood, metal or plaster that serves to decorate or outline an area in your office or home. Decoration of this material can be implemented on the exterior or interior of your home or office. Mouldings are installed to frame the walls, ceilings, windows, and door openings of your home or offices.

Crown mouldings can add elegance to any room with the decorative design from the wall to ceiling. The importance of a crown moulding is as significant as choosing a frame for an expensive painting. It is advisable that you choose your crown moulding in harmony with the concept of your home interiors. Be careful not to choose the design of your crown moulding to be not too simple or not too big or small so as not to cheapen the area where it is installed. Some homeowners would choose crown moulding to suit their personal style, and this shows the importance of this accent piece.

The application of crown moulding is usually positioned along the seams where the wall meets the ceiling.
The Art of Mastering Houses

It is an excellent way to enhance the beauty and glamour of your home or office and increase the value of the place by installing crown moulding.
Houses: 10 Mistakes that Most People Make

There are some guidelines to follow before a crown moulding is installed.

The first preparation is by locating all the studs in your walls and ceiling joist. This can be done by making some light pencil marks on the point where you see the moulding up when nailing it.

Next is to figure out which way the ceiling joists run. In a square room, this preparation is important because you have only the nailers for the top of your trim on two of the four walls.

The size of your triangle nailer can be found easily by using a framing square. The nailer actually does not need to fit perfectly in order to work effectively.

The next advice is not to have the nailer forcing your moulding not to sit flush against the wall and ceiling by leaving a little room.

Your next guideline is the installation of the nailers on the walls without ceiling nailers. Position the nailer against the wall and ceiling, then pre-drill the nailer using a counter sink drill bit into the studs on the walls. Then, attach to the stud using a 3 inches coarse thread drywall screw.

Your next preparation is to have a reference line on the wall at the height you want the crown moulding would sit on the wall. A way to do this is by taking a piece of scrap moulding and place it on the wall and ceiling in a proper way, then do a pencil mark on the wall at the bottom of the trim.